新聞中心
在運用直線導軌時應注意的事項
來源:http://www.zhzdh888.com/ 日期:2022-07-19 發布人:
直線導軌歸于精細零件,它是用來支撐和引導運動部件的,它可以在高負載的情況下實現高精度的直線運動,但是大家在使用的時候還是要小心些,如果運用不當,也不能到達預期的功能效果,并且簡單使直線導軌損壞
Linear guide is a fine part, which is used to support and guide moving parts. It can achieve high-precision linear motion under high load, but we should be careful when using it. If it is not used properly, it will not achieve the expected functional effect, and simply damage the linear guide
所以,在運用直線導軌應注意以下事項:
Therefore, the following matters should be paid attention to when using linear guide rail:
1防止銹蝕:直接用手拿取直線導軌時,要充分洗去手上的汗液,并涂以礦物油后再進行操作,在旱季和夏日特別要注意防銹。
1. Prevent corrosion: when directly taking the linear guide rail by hand, it is necessary to fully wash the sweat from your hands and apply high-quality mineral oil before operation. Pay special attention to rust prevention in dry seasons and summer.
2裝置東西要適宜:直線導軌運用適宜、精確的裝置東西盡量運用專用東西,竭力防止運用布類和短纖維之類的東西。


2. The devices should be suitable: the linear guide rail should use appropriate and accurate devices, try to use special things, and try to prevent the use of things such as cloth and short fibers.
3堅持環境清洗:堅持直線導軌及其周圍環境的清洗即使是肉眼看不見的細小塵埃進入導軌,也會添加導軌的磨損,振蕩和噪聲。
3 adhere to environmental cleaning: adhere to the cleaning of the linear guide rail and its surrounding environment. Even if the invisible fine dust enters the guide rail, it will add wear, vibration and noise to the guide rail.
4裝置要認真仔細:直線導軌在運用裝置時要認真仔細,不允許強力沖壓,不允許用錘直接敲擊導軌,不允許經過翻滾體傳遞壓力。
4. The device should be careful: the linear guide rail should be careful when using the device, and it is not allowed to punch strongly, directly hit the guide rail with a hammer, or transmit pressure through the tumbling body.
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服務http://www.zhzdh888.com
The above is a detailed introduction about the guide screw for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.zhzdh888.com
相關新聞 /RELATED TO RECOMMEND
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23
一文讀懂《傳動技術基礎(滾珠絲杠)》:滾珠絲杠的結構+精度+選型
2026-03-19
相關產品 /RELATED TO RECOMMEND





