新聞中心
導軌滑軌絲桿油脂性能特點是什么?
來源:http://www.zhzdh888.com/ 日期:2022-08-04 發布人:
導軌/滑軌絲桿用油:直線模組是由導軌、滑塊、絲杠、聯軸器、馬達等附件精密組合而成 廣泛應用于各行各業自動化設備
Guide rail / slide rail screw oil recommendation: the linear module is a precision combination of guide rail, slide block, lead screw, coupling, motor and other accessories, which is widely used in various industries and automation equipment
針對使用工況對潤滑要求有以下幾點:1、機械安定性優異、抗磨性好,具有高度的耐久性,2、潤滑性好,減少工作部件磨損,延長產品壽命,3、具有柔順觸感的阻尼性,降噪明顯聲音平緩,4、極低的揮發率、優異的耐水性能,密封性能良好,5、溫度適用范圍寬,低溫環境無卡滯、髙溫工作油脂不易滲漏。

The lubrication requirements for the working conditions are as follows: 1. Excellent mechanical stability, good anti-wear and high durability; 2. Good lubricity, reducing the wear of working parts and extending the service life of products; 3. It has a soft tactile damping property, obvious noise reduction and smooth sound; 4. Extremely low volatility, excellent water resistance and good sealing performance; 5. It has a wide range of temperature
application and no stagnation in low temperature environment High temperature working grease is not easy to leak.
application and no stagnation in low temperature environment High temperature working grease is not easy to leak.
導軌降噪音潤滑脂是由復合型深度精制基礎油和高性能復合稠化劑精煉而成,具有優良的高速潤滑性和承載能力,較低的摩擦系數,提高絲桿工作效率,優異低溫防卡性能,起動扭矩極小,不凍結不龜裂,抗微動磨損保護,可降低滑動摩擦微震動產生的噪聲等特點。歡迎大家咨詢索樣!
The guide rail noise reducing grease is refined by the composite deep refining base oil and high-performance composite thickener. It has excellent high-speed lubricity and bearing capacity, low friction coefficient, improved working efficiency of the screw rod, excellent low-temperature anti-jamming performance, small starting torque, no freezing and cracking, anti fretting wear protection, and can reduce the noise caused by sliding friction and micro vibration. Welcome to consult the sample!
以上就是為大家介紹的有關導軌絲杠的詳細的介紹,希望對您有所幫助.如果您有什么疑問的話,歡迎聯系我們.我們將以的態度,為您提供服http://www.zhzdh888.com
The above is the detailed introduction of the guide rail lead screw for you. I hope it will help you. If you have any questions, please contact us. We will provide services for you with a professional attitude http://www.zhzdh888.com
- 上一篇:皮帶導軌滑臺和絲桿傳動滑臺兩者之間的區別
- 下一篇:滾珠絲杠副軸向間隙調整的兩種方法
相關新聞 /RELATED TO RECOMMEND
導軌絲杠裝配避坑!全流程實操詳解,80%的故障源于裝配不規范,一次達標不返工
2026-04-13
導軌絲杠 | 滾珠絲杠避坑指南!原理吃透不踩雷,高精度傳動99%的人都沒搞懂核心邏輯
2026-04-08
導軌絲杠選型避坑!四步法精準選型,90%工程師都在用,杜絕動力不足、共振隱患
2026-04-07
別再瞎選導軌絲杠!垂直安裝不設防墜,幾千斤負載直接砸穿設備
2026-04-06
滾動 vs 滑動:導軌絲杠選錯,磨損翻倍、維護成本直接飆升
2026-03-27
導軌絲杠:人形機器人直線運動核心,一步穩不穩全看它
2026-03-26
拒絕卡頓、損耗!導軌絲杠,決定設備精度與壽命的核心關鍵
2026-03-26
導軌絲杠:被德日卡脖子半世紀,國產終于打破高精度壟斷
2026-03-25
導軌絲杠:機床精度的核心內功,制造破局不靠低價靠硬功
2026-03-24
直線模組選型難?吃透導軌絲杠這篇就夠了
2026-03-24
導軌絲杠卡死、精度下降?避開這些坑,少走半年彎路
2026-03-23
一文讀懂《傳動技術基礎(滾珠絲杠)》:滾珠絲杠的結構+精度+選型
2026-03-19





