一般情況下，直線導軌壓入導軌腔后是不會出現堵塞情況的。但是在現實生活中又不少操作者在使用直線導軌時會經常出現導軌上軸承滾動不靈活的情況，這樣就會影響導軌的工作性能。那么在運用直線導軌時應該注意哪些問題呢？導軌絲杠廠家為您講解。

Generally, the linear guide rail will not be blocked after it is pressed into the guide rail cavity. However, in real life, many operators often have inflexible rolling of the bearing on the guide rail when using the linear guide rail, which will affect the working performance of the guide rail. So what should we pay attention to when using linear guide rail? The guide screw manufacturer will explain to you.

一、直線導軌裝置方法

1、 Linear guide device method

由于直線導軌是高精度產品，如果裝置不正確，很容易造成導軌通道損壞，造成導軌損壞。在裝置直線導軌時應配備專用模具，不能隨意敲擊。當導軌壓入軸內時，一定要根據軸的承受力大小去進行裝置。進行設備安裝時要盡量使用氣壓或液壓，如果在裝置過程中有異常聲響時須立即停止安裝。以免軸承通道損壞。

Because the linear guide rail is a high-precision product, if the device is not correct, it is easy to cause damage to the guide rail channel, causing damage to the guide rail. When installing the linear guide rail, it should be equipped with a special mold, which can not be knocked at will. When the guide rail is pressed into the shaft, it must be installed according to the bearing capacity of the shaft. When installing the equipment, try to use air pressure or hydraulic pressure. If there is abnormal noise in the process of installation, stop the installation immediately. To avoid damage to the bearing channel.

二、避免導軌存留異物

2、 Avoid foreign matters in the guide rail

直線導軌在安裝或者工作時，會很容易掉入鐵屑，這樣會對軌道的運行產生影響。為了避免直線導軌因為鐵屑而產生磨損，有的廠家會在導軌腔內涂上一定量的潤滑油或潤滑脂，以達到潤滑效果。然而，在實際生產當中不少操作人員很難控制潤滑液的使用量，這樣會很容易導致導軌腔中積聚大量潤滑液，當導軌工作時，潤滑液就會沿著軌道進入軸承。

When the linear guide rail is installed or working, it is easy to fall into scrap iron, which will affect the operation of the rail. In order to avoid wear of linear guide rail due to iron filings, some manufacturers will apply a certain amount of lubricating oil or grease in the guide rail cavity to achieve lubrication effect. However, in actual production, it is difficult for many operators to control the amount of lubricant used, which will easily lead to a large amount of lubricant accumulated in the guide rail cavity. When the guide rail works, the lubricant will enter the bearing along the rail.

三、防止油漆生銹

3、 Prevent paint from rusting

油漆生銹是直線導軌常遇到的情況。為了防止直線導軌發生油漆生銹的情況，在日常使用時應當經常對導軌表面進行護理，尤其是對于已經在倉庫放置一段時間的直線導軌來講，在長期放置過程中難免會出現導軌油漆生銹的情況，這主要是因為倉庫中環境比較復雜，在一定的溫度和濕度下不少物質混合會構成腐蝕性物質，并對導軌表面造成腐蝕影響，使導軌產生磨損。

Rust on the paint is a common condition of linear guide rail. In order to prevent the paint rust of the linear guide rail, the surface of the guide rail should be regularly treated during daily use. Especially for the linear guide rail that has been placed in the warehouse for a period of time, it is inevitable that the paint rust of the guide rail will occur during long-term storage. This is mainly because the environment in the warehouse is relatively complex, and many substances will form corrosive substances when mixed under a certain temperature and humidity, It will also cause corrosion on the surface of the guide rail and make the guide rail wear.

直線導軌雖然在實際工業生產當中使用頻率比較高，但是不少工廠因為不懂得科學維護，以于導軌表面常常會出現磨損的情況。為了避免影響生產工作，建議廠家要經常性的對導軌表面進行維護和保養，同時還要做好維修記錄。更多相關內容就來咨詢我們http://www.zhzdh888.com吧！

Although the linear guide rail is used frequently in actual industrial production, many factories often wear the guide rail surface because they do not understand scientific maintenance. In order to avoid affecting the production work, it is recommended that the manufacturer should regularly maintain the surface of the guide rail, and make maintenance records at the same time. Consult us for more information http://www.zhzdh888.com Come on!